Funssor Anycubic kobra s1/ S1C 3D Printer 8mm Aluminum alloy CNC Heat Bed Build Plate 110/220V Silicone Heater Pad Upgrade Kit With 5MM thickness Bed Carriage

For 220V user, connect blue and red wire.Then yellow cable (the ground wire).No need to connect the black wire

For the 110 V version ,use the included wire adapter for the red/blue to black connector that came with the kit .Then Connect Adapter Cable and Black cable. Yellow Cable (Ground wire connect as usual)

Parcel includes :

1pcs silicone pad+1pcs magnetic base +1pcs Aluminum alloy bed+1pcs PEI  Texture Sheet+1pcs Bed Carriage

🔥 Key Features of Alloy Bed:

⚡ Supports 220V & 110V setups

⚡ Ultra-flat (≤0.1mm deviation)

⚡ 8mm thick aluminum – No more warped 'taco' beds

For details how the kit  perform,please check video shared by Kanrog Creation in youtube

FAQ:

Q1)What is the maximum temperature this bed can reach?

A1)The silicone pad material has a temperature resistance of 180-200 degrees.While it is suggested to run under 160 degrees for long-term use.

Q2)could you tell me how much i would lose with hardware that comes with the Hot Bed?

A2)If using the

alu bed carriage

and the bed kit,you'll loose up to 5mm in usable z-space, with stock settings and the springs.You can tune it with rinkhals to gain 3mm more z-space by adjusting the safe_z_home value:[safe_z_home]

z_hop: 1.0