Bubble Magus Mini Q Skimmer Built-in Hanging Cylinder Type DC Needle Brush Water Pump for 75L Aquarium

MiniQ has a built-in hanging cylinder egg Suitable for use in 75 liters of marine fish tanks DC needle brush water pump: DC5V, 2W Adapter: Input: 100-240V, 50Hz, Output: DC5V, 1A The pylon is suitable for fish tank glass under 12mm MiniQ hanging cylinder built-in egg division: Is THE latest research and development of BUBBLE-MAGUS products, especially for the exquisite small seawater fish tank design, the length and width are only 82 * 83mm, the slim shape is very suitable for placing in the fish tank back filter, the main parts are molded with precision molds, including the diversion box, water level control valve, silencer, and other professional configurations are readily available. The core technology of the DC needle brush pump is applied on the miniQ, and the motor part of the pump body is cleverly combined with the barrel body to form a whole including the intake channel, with the newly developed fine needle brush and titanium alloy shaft, the foaming power is strong, and the sewage is sensitive and efficient. Built-in newly designed silicone silencer for stable and silent operation. miniQ for 5 volts 1 amp low voltage DC power supply, safe and low energy consumption, the use of USB universal power interface, in addition to the ordinary USB port mobile phone charger power supply, such as power failure, you can also connect the mobile phone charging treasure power supply for emergency oxygenation and sewage, versatility and flexibility. MiniQ contains the outlet water diversion box, conical collection neck, the operation of the water and gas mixture uniformly, high sewage efficiency; the newly developed precision mold in the barrel to achieve a "labyrinth" water channel, drainage of tiny bubbles sinking and overflowing less, good separation effect, knob type water level control valve can quickly and accurately adjust the egg water level so that the egg to maintain a good operating state. Customer Service Related Questions and Answers: Q: How do I adjust the water level of the skimmer (bubble noodles)? Answer: Rotate the water level adjustment knob, rotate clockwise to increase the amount of egg parting water, skimmer bubble surface drops, counterclockwise rotation to reduce skimmer separation water, skimmer bubble surface rises, please adjust the bubble surface to the bottom position of the collection cup, bubbles will slowly accumulate, so do not adjust too high, so as not to burst the occurrence. Q: Why are tiny bubbles spilling out? A: Due to the working principle of the skimmer, there will be a large number of tiny bubbles generated, a small part will be discharged with the water in addition to the skimmer, in the early run-in period, the overflow of tiny bubbles will be more, but with the skimmer running stabilization, the overflow of tiny bubbles will be significantly reduced, skimmers are recommended for use in the back filter, and will not have an impact on the fish tank ornamentation. (Note: Depending on how the skimmer works, tiny bubbles don't disappear completely) Q: Why can't the bubbles in the neck of the skimmer collection accumulate? Answer: In the early stage of skimmer work, there will be a running-in period, the initial skimmer internal bubbles may rupture quickly, the wastewater collection situation is not ideal, is due to the skimmer manufacturing process there will be oil stains and other substances will adhere to the surface of the parts, is not conducive to bubble adsorption and accumulation, fish tank water quality also has a certain relationship, too much or too little organic waste components have an impact on the skimmer working state, need time to adapt. After the run-in period, the skimmer bubbles have an enhanced ability to capture organic waste, and the bubbles collected around the neck become viscous and easily rise and collect. The running-in period is generally around 5 to 10 days, please be patient, thoroughly washing the skimmer with mild washing products such as dish soap can speed up the running-in time, but do not use chemicals to wash or wipe the skimmer. Q: I observed that the small hole in the top of the deflector box does not produce water, is there a problem with the skimmerdistribution? A: There will be such a phenomenon at the beginning of the run-in period, because, as in the previous question, after the run-in period, it will return to normal, don't worry. Q: Why doesn't egg break up run anymore? A: You can do the following checks: check whether the power supply has been connected, whether the adapter is working properly (can be tested with USB port, 5V1A ordinary mobile phone charger), take out the egg to check whether the pump has sucked in the foreign matter, check whether the needle brush rotor can easily rotate without jamming, and clean thoroughly, if there is no abnormality after inspection, but still can not run, please contact the manufacturer for technical support. Q: What is the purpose of the included brush? A: The inlet pipe of miniQ skimmer is integrated, no external trachea is required, and the brush can clean the intake pipe when necessary to prevent salt stains from clogging and ensure the normal operation of the skimmer. Q: What does the watermark mark on the barrel body mean? A: It is recommended that when the skimmer is used, the external water level does not exceed this water level, generally speaking, the external water level of this skimmer can operate normally in the vicinity of the water level, but pay attention to the opening of the regulating valve, do not burst or bubbles can not be hit.