Water Transfer Pump Engine Water Pump Gasoline Powered Water Pump for Fire-Fighting Water Supply Water Drainage Garden Watering

This gasoline-powered water pump with a powerful 7.5 HP engine will support your farmland with a steady and strong water flow. With its high head and large water flow, it can easily cope with even large irrigation areas and enhance your agricultural productivity. In addition, you can start the machine by quickly pulling the pulley, bringing you an easy and comfortable user experience.

Key Features

1.Long Service Life: The high-quality aluminum, iron, and plastic and the exquisite plastic spraying process provide the product with high hardness, long service life, and excellent resistance to corrosion, rust, deformation, and abrasion.

2.Low Fuel Consumption: It is equipped with a high-precision carburetor, which improves the combustion efficiency, thus reducing fuel consumption, which is energy-saving and environmentally friendly.

3.Excellent Performance: It is equipped with a powerful 7.5 HP four-stroke engine with up to 3600rpm speed and 196cc displacement, ensuring efficient and surging water transfer with a maximum head of 91.86ft, a maximum suction head of 22.97ft, and a maximum flow rate of 2118.88ft³/h. It greatly improves the water pumping efficiency.

4.Thoughtful Design: The large fuel tank (1gal) can avoid frequent refueling, saving time and effort.

5.Quick Heat Dissipation: Multiple air vents and the air cooling system can promote internal and external air circulation and accelerate heat transfer to avoid engine overheating and damage.

Details

Sturdy Frame: It keeps the product out of direct contact with the ground, avoiding collisions and direct damage to the engine, while also providing you with handles to easily move it.

Rubber Gasket: It can effectively absorb and minimize the vibration generated when the product is running to prevent it from damaging the fuel tank.

Application

This product is suitable for water transfer or pumping in agricultural irrigation, fire-fighting water supply, water drainage, garden watering, greenhouse water transfer, underground water drainage in construction sites, pond drainage, and so on.

Specifications

Color: Black, Yellow

Engine Model: WP30

Engine Type: 170F, Single Cylinder, Air Cooled, 4-stroke

Material: Aluminum, Iron, Plastic, Rubber, Aluminum Alloy

Process: Plastic Spraying

Fuel Type: 4-stroke Gasoline

Mount Type: Free Standing

Assembly Required: Yes

Capacity: 60m³/2118.88ft³/h

Power: 7.5HP

Speed: 3600rpm

Maximum Head: 28m/91.86ft

Maximum Suction Head: 7m/22.97ft

Inlet/Outlet Diameter: 5cm/1.97in

Fuel Tank Capacity: 4L/1gal

Displacement: 196cc

Inlet/Outlet Connection Diameter: 8cm/3in

Product Size: 49*36*41cm/19.29*14.17*16.14in

Package Size: 51.5*38.3*41.5cm/20.28*15.08*16.34in

Gross Weight: 24kg/52.91lbs

Package Included

1* Gasoline Powered Water Pump

1* English Manual

Other Needed Accessories

Notes

1.Please check the size carefully before ordering. Before use, please read the user manual and pay attention to the safety instructions inside.

2.Please note that the inlet and outlet hoses need to be purchased separately. Please choose clean and unadulterated gasoline and oil.

3.Before starting, please fill the pump head with water to avoid damaging the pump head. (When the water flows out, it is filled up.)

4.After pumping water normally, the throttle switch can be closed a little bit, which can save gasoline greatly without affecting the water effect. Please note that it is forbidden to stop the product at high speed, and it should be stopped when the throttle is minimized.

5.Please note that the air filter needs to be checked and cleaned regularly, and the dirty filter element should be washed with soapy water and dried after use.

6.After each use, please remove the drain plug at the front of the pump and tilt the pump forward to drain all remaining water inside the pump.

7.When the machine is not used for a long time, please consume the gasoline inside the carburetor before turning off the switch, otherwise the gasoline left inside the carburetor for a long time will lead to carburetor oxidation.

8.Please note that when the machine overheats, it should be stopped for a period of time before working. Adding oil should be done in a cold state.

9.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.