Swimming Pool RGB LED Pool Lights IP68 Waterproof AC12V 2500lm 45W RGB LED Pool Light with Remote Control

Application
It can be safely and widely used in swimming pools, aquariums, fountains, ponds, waterfalls, and seawater environments.

How to Install
1.Drill 4 holes for the mounting bracket and install the bracket to the pool wall.
2.Connect the buckle of the pool light to the bracket buckle and screw the light to the mounting bracket.
3.The finish area must be flat and flush with the face of the mounting spacer, ensuring a snug fit between the light and the wall.
4.Wrap the length of the cable up to a maximum of 1.2m/4ft long on the back of the light out of the pool for maintenance.
5.Connect all wires in the junction box and feed paraffin.
6.Secure the junction box cover in place and make sure all gaskets/seals fit in properly.

Specification
Material: ABS, PC
Product Color: White
Light Color: Red, Green, Blue, Yellow, Purple, Orange, White
Light Mode: 11 Changing Modes
Number of LED Beads: 460 Beads
Beam Angle:120 Degrees
Controller Battery: One 23A,12V (Included)
CRI: 75
Lumen: 2500lm
Power: 45W
Voltage Input: AC12V
Power Cord Length: 1.87m/6.14ft
Working Life: 10,000H
Package Size: 31*32*10cm/12.2*12.6*3.94in
Product Size(Φ*H): 29.5*7cm/11.6*2.76in
Net Weight: 1.1kg/2.43lbs
Gross Weight: 1.5kg/3.31lbs

Package Included
1* RGB LED Pool Light
1* Remote Control
1* English Manual
1* Mounting Bracket
1* Controller Battery
All Screws for Assembly

Notes
1.Please read the operating manual completely before use. And pay particular attention to the safety instructions.
2.Please be aware that underwater lights must be low-voltage products, you need to buy an AC12V transformer to power the light. This pool light needs to be used with a professional LED transformer, not a halogen bulb transformer.
3.We strongly recommend that this product be installed by a professional electrician. It can only be mounted on a flat wall and is not suitable for being installed in a pool light niche.
4.The remote control effect is better when the lamp is installed 0.3 to 0.5 meters above the water surface.
5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.