LED Driver 40-60Wx4 240W 2.4G APP & Remote Control, Dimming and Color-Changeable Lighting Transformer For Chandelier LED Tape

Input Voltage : AC180-240V, not suit for AC110V

Output Voltage : (40-60W)x4: DC150-200V

Output Current: 240mA

Control : 2.4G RF Remote and APP

Control Distance : Less than 30m

Size: 170*39*23mm

Package Include: 1pcs LED driver + 1pcs Remote (not include battery)

How to Use:

Control by Remote:

all new remote need to pair the code with the led driver at the first time to use.

1. connect the led driver to your lamp, and then turn on the lamp 5 seconds.

2. press the remote "SETUP" 3-5 seconds or 3-5 times to pair code.

3. the lamp will flick on/off three times, it means that the Remote had pair to the Driver.

4. use the remote to control the lamp.

Control by App:

1. Scan the Driver QR code to Download the App, open your phone bluetooth.

2. connect the LED Driver to the lamp correctly.

3. open the App, turn on the lamp , at the same time press the App pair code button 2-3 second.

4. the lamp will flick on/off three times, it means that the driver had pair to the App.

5. use the App to control the lamp.

Note:

if your lamp still not working, it maybe have 4 reasons.

you can try to find the problem to solve it.

1. your lamp light source had broken, like the LED Chip short-circuit or burn out.

Solution: change the Chandelier LED Tape light source.

2. the led driver didn't connect correctly to the lamp.

Solution: Try to connect the output cable again.

3. the App or Remote can not  control.

Solution: Try to pair the code again.

4. the led driver output cable positive pole and negative pole is different with your old driver.

Solution: open the Driver box, to check the correct output cable + - pole, connect correct again.

Our Driver output cable V+ V- Cable.