Wireless PIR Motion Activated Switch Solid COB Neon Light Strip Pure Silicone IP65 Waterproof Cuttable Easy Install for Stairs

NOTE:

1. The sensor will also work at daylight

2. When the sensor power is too low it will not work properly, please charge it in time !!

3. One receiving host can be equipped with up to 7 wireless sensor switches at most.

4. One wireless sensor switch can be equipped with up to 100 receiving hosts at most.

Specifications:

Product Name: Wireless PIR Motion Sensor COB Neon Strip (The Sensor Build-in 450mA Battery)

Main Material: 100% Pure Silicone Gel Tube

Output Voltages: DC24V

Input Voltages: AC110V/ AC220V

Lighting Color: Cold White(5500K-6500K)/ Natural White(4000K-5000K)/ Warm White(2800K-3500K)

Wireless Sensor Detection Range: 1-3M

Receiving Host Induction Distance:<=10M (Distance from Wireless Sensor Switch to Receiver)

Features:

The Under Cabinet LED Strip Lights are an excellent addition to your home or office lighting setup. These versatile lights making them perfect for use in your kitchen, pantry, bedroom, wardrobe, or closet. With Portable PIR motion sensor, you can control the lights without ever having to touch them, And it more flexible to stick anywhere you like, simple and easy to install

Using:

1. Connect the 24V power supply to the receiving host and led strip

2. When the blue light turns on, press the button on the back of the receiver until the LED strip flashes once. (If you do not press it within 8 seconds, the blue light will turn off. At this point, just press the button to turn it on, and making the LED strip flash once that indicates successful activation.)

3. Then press and hold the button on the back of the wireless sensor until the LED strip flashes again, indicating successful pairing.

4. To pair multiple wireless sensors: continue pressing the button on the back of the receiver until the LED strip flashes once, then press the button on the back of the wireless sensor until the LED strip flashes once — this indicates successful pairing.

5. To unpair: press and hold the button on the back of the receiver until the LED strip flashes more than three times, indicating successful unpairing.