Led PIR Motion Sensor Lamp 220V 3W 5W 7W 9W 12W LED Bulb With Sound Sensor E27 Infrared Radiation Motion Detector Security Light

Led PIR Motion Sensor Lamp 220V 3W 5W 7W 9W 12W LED Bulb With Sound Sensor E27 Infrared Radiation Motion Detector Security Light
Too bright or in the day,the lamp doesn't work.
It only works in dark environment or at night.
PIR Motion Sensor Lamp:When the bulbs turn on, it will flash 1 or 2 times, it is self-check, it need about 30-60seconds stability time for the infrared sensor, it Will be able to work properly.
Sound Sensor / Voice Induction Lamp: Lamp will light up continuously around 1 minute after connect with power, then turn-off automatically, please wait around 15 seconds for sensing mode starts.
PIR Motion Sensor Lamp
Instruction:
Base Tpye: E27
Input voltage: AC85-265V(110V 120V 130V 220V 230V 240V)
Wattage: 5W 7W 9W
Detection range: ≤ 3M
Color temperature: Cool White 6500K
1.The sensor head faced to Exit or Entrance
2.The lamp should be kept far away from which temperature is high and sensitive place.
3.Not put any big object around it.
Work principle:
When you in sensor range, it works about 40 seconds.
After 40 seconds, if you not move, the lamp not work.
Too bright or in the day,the lamp doesn't work.
It only works in dark environment or at night.
Trouble removal:
Occasionally it can auto light up, may be there's animal moving or the install angle is not correct.
The lamp is turned off every 40 seconds, and repeat it, you have to check whether a person or an animal moves, or take it to another room to check.
Sound Sensor Lamp
Specification:
Light Color: Cold White
Connector type: E27
Power: 3W/5W/7W/9W/12W(Sound Sensor)
Voltage: AC200V-240V
Work principle:
It works about 30 seconds.
After 30 seconds, if you not make voice, the lamp not work.
Too bright or in the day,the lamp doesn't work.
It only works in dark environment or at night.
Trouble Removal:
When install it, it will auto light up and off, occasionally it can auto light up, the reason may be there's bulb turns to hot place, or install angle is not correct.