5M 10M 20M RGBIC Horse Racing LED Light Strips 24V WS2811 Pixel Flex Ribbon Running Water Flow Tape Lamp Wireless Remote Control

● Features:

1、Led strip: WS2811 (Dream color) & 5050SMD

2、Working Temperature: -20 °~ 60 °

3、Easy to Install : Using the double adhesive.You can stick the LED strip to any dry, clean and smooth place .

4、DIY Cuttable:The lights are cuttable at marked place, granting you more creative freedom during installation.

5、Flexible:The led strip is Flexible.It can be bent at any angle

6、Controlled by Bluetooth App or RF wireless 28 Keys Remote Control.

● RGB Horse Race LED Strip Light:

LED Strip: WS2811 RGBIC Addressable Led Strip Light

LED Type: SMD5050

LED Qty: 60LEDs/m (Others is only 18LEDs/m or 30LEDs/m)

IC Type: WS2811

Working Voltage: DC 24V

Waterproof IP: IP30 Non-Waterproof

PCB width: 10mm

Cuttable at each 10cm

IC Qty: 1pc IC for 6LEDs

Come with male female 3pin connector (Red Wire is +，White wire is -, Green wire is signal wire）

● RGBIC RF Touch LED Controller

Working Voltage: DC 5-24V

Max Control Pixels <2048 Pixels

Effects Modes: 376 kinds of different modes.Most of effects are running water when you turn ON. Also with Pause and Auto-play function.

Battery Type: CR2025 ( The remote is not with battery)

8 Keys Function: ON/OFF , Speed UP/Down, Mode+/Mode-, MENU, Brightness UP/Down, Touch color ring in the middle to adjust the static color.

Remote Distance: 20 Meters

How to adjust the pixel number ?

Step 1: Power Off the lights.

Step 2: Long press " MENU" 5 seconds enter into pixel setting menu

Step 3: Press "Mode+" to increase the pixels number,till the whole led strip are light ON. Press "Mode-" to decrease the pixel number.

Step 4: Press "ON/OFF" key to Save !