Modern Magnetic Track Lights Embedded LED White Spotlight Downlight Living Room Without Main Light Lighting Grille Lamp Series

Advantages of no main light lighting design:

1.Simple installation and maintenance.

Only need to lay the magnetic track, the lamp can be magnetically sucked up and down, and it can be done in 1 second. If the lamp is broken, it can be quickly removed for maintenance, which is not as troublesome as traditional lighting fixtures.

2.Low voltage safety, no touch hazard.

Magnetic track light 48V low voltage design, even if the track is always electrified, there is no danger of electric shock when touching or installing the light by hand.

3.Four installation methods,It can also be used as the main light without a ceiling.

Many families want to do mainless lights after decoration, but finally give up because the ceiling is too troublesome. And magnetic lights have everything on the track, no need to cut multiple holes or hide wires. The use of surface-mounted guide rails can realize the no-ceiling design without main lights.

4.It can move freely and adjust the angle freely.

On the magnetic track, the light source can move freely, and the lights can be freely arranged according to the space requirements. In addition, many magnetic light sources have adjustable angles, including magnetic spotlights, magnetic grid square boxes, etc., increasing the freedom of lighting design.

5.It can be matched with various lamps.

The magnetic lamp adopts a modular concept, and there are many light source modules that can be applied to the magnetic lamp, including downlights, spotlights, grille lights, floodlights, chandeliers, etc. The light source can be freely selected, allowing DIY matching to meet the lighting needs of different spaces.

6.The number of lamps can be increased or decreased freely.

There is no limit to the number of lamps installed on the track (theoretically it should not exceed the wattage of the transformer power supply, generally the transformer power supply is above 100w). If the light is not bright enough, increase the light source by magnetic attraction; if the brightness is too high, just lower the light source.