JAYO ABS/PLA META/PETG/SILK/TPU/Wood/ Rainbow/Marble 3D Printer Filament 1.75mm 5 Roll 3D Printing Materials for 3D Printer

1：PLA META Filament Features

1. Environmental protection, non-toxic, biodegradable;
2. Soft and warm colors
3. Low shrinkage rate;
4. High strength and rigidity;
5. Very good toughness, not easy to break
6. The printing temperature is 180~200°. Lower printing temperature, means more energy saving and environmental protection, reduce printer loss.
7. Good fluidity: The printing fluency is better than the existing PLA and PLA+, greatly improving the printing success rate.
8. Good fall resistance and impact resistance: After the fall test, the fall resistance is about one times better than the existing PLA and PLA+.

Suitable for all models of FDM3D printers, suitable for printing crafts, artwork and industrial design samples, etc.

High Liquidity
Suitable For Fast Printing

Lower printing temperature,
means more energy saving and environmental protection, reduce printer loss.

PLA META Filament Parameter

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 180-200℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles

2：PLA Filament Features

1. Environmental protection , non-toxic , biodegradable ;
2. No Bubble , Low shrinkage , bright color ;
3. High strength and strong rigidity ;

It is suitable for all types of FDM3D printers , suitable for printing crafts , artworks and industrial design samples, etc.

PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.

PLA Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

3：PETG Filament Features

1. Environmental protection and non-toxic;
2. Low shrinkage;Bright color;High transparency and good gloss.
3. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent, weather resistance, and good adhesion.
4. Good dimensional stability, no cracks And warping.
Suitable for all types of FDM3D printers, suitable to Co-print all kinds of commonly used models, crafts, industry Pieces, advertising words, etc.

PETG filament is easy to use like PLA, durable strength like ABS

PETG Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

4：PLA+ Filament Features

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;

PLA PLUS is 10 times higher toughness than PLA and has excellent toughness.

PLA+ Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 210-235℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

5：SILK Filament Features

1. Environmentally friendly, non-toxic, biodegradable;
2. Close to silk effect;
3. Low shrinkage
4. Toughness 50 times higher than PLA on the market
5.Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable Co-print crafts, artwork, industrial design samples And product models with higher toughness requirements, etc.

silk filament brings arts & crafts and 3D projects smooth shiny silk-like surface

SILK Filament Parameter

1:Wire diameter: 1.75MM
2:Tolerance: ± 0.02MM
3:Printing temperature: 200-230 ℃
4:Bottom plate temperature: glue shall be applied without heating
5:No glue can be applied when heating 60-80 ℃
6:Tensile force (KGF): 6-8
(Enterprise standard 23 ℃ wire diameter 1.75 mm)
7:Melt index: 4-8g/10min
(190℃,2.16kg)
(Refer to GB/T 3682.1-2018)
8:Elongation at break: 200%
9:Enterprise standard 23 ℃ wire diameter 1.75 mm)
10:Melting point: 165-180
11:Hot deformation temperature ℃: 55
12:Density g/cm ³： 1.24
13:Water absorption%: 0.7%
14:Printing speed: 30-60MM/s
15:Bubble: 100% zero bubble

6：TPU Filament Features（0.5KG/Roll）

TPU Product Features

1. Environmental protection and non-toxic;
2. Bright color, high resilience, new and upgraded high liquidity;
3. The material is soft and has good extensibility;
4. Good aging resistance;
It is applicable to all types of FDM3D printers, and suitable for printing product models with good extensibility such as children's toys, shoes, medical supplies, etc.

TPU Parameter

Print Temp: 205-230°C
Hot Bed Temp: 40°C-60°C
Print Speed: 20-40mm/s
Fracture Growth Rate: 600%
Dimensional Accuracy: +/- 0.03mm

7：ABS Filament Features（0.65KG/Roll）

ABS Filament

ABS filament excellent impact strength, abrasion performance, chemical resistance and dyeability. It can easy to move the supporting material.

Compatible printers must have heating device, can print models have strict requirement of strength and need process such as: Dyeing, polishing, electroplating,ect. Good for Printing small parts, ect.

100% no bubble 3d printer material.

Parameter

Diameter: 1.75mm

Tolerance: +/-0.02mm

Print speed: 50-100mm/s

Recommend print Temperature: 220-240℃

Platform temperature: 80-120℃

Net weight: 0.65kg with spool

Neatly Wound Filament

JAYO has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of JAYO PETG/PLA+/WOOD/SILK PLA filament with few knots, avoiding possible breaks.

Shipping

* You can check parcel tracking information through this ways:

1.https://www.17track.net

2.http://track.4px.com

3. Leave a message to us, then we will check the parcel information for you.

After Sale

*We offer a one-year warranty for electronic products , but damage caused by using non original brand filament or not following the instructions correctly is not covered by the warranty.

*Please provide us with the proof of video if products have any problem after receiving the parcel within 7 days, we will offer replacement or refund after confirming the problem.

Contact Us

*If satisfied with our product, please kindly leave us a positive feedback and 5 stars.

*If any questions, you may contact our customer service in 24 hours before negative feedback. We'll try our best to help you.

We look forward to cooperating with you next time!