Wirewound Resistor 25W 8ohm 50W 6ohm LED Decoder Load Resistors for Car Fix LED Bulb Fast Flash Turn Signal Blink Error Code

Wirewound Resistor 25W 8ohm 50W 6ohm LED Decoder Load Resistors for Car Fix LED Bulb Fast Flash Turn Signal Blink Error Code
25W 8ohm - 2pcs
50W 6ohm -2pcs
This resistor is only suitable for 12V models, not for 24V trucks. Usually a lamp needs a resistor

Replacement resistor kit for car airbag repair:
1/4W 1% 2ohm, 2.2ohm, 2.4ohm, 2.7ohm, 3ohm, 3.3ohm = 120pcs
The resistance value of each car is different, these 6 types already include all private car models. You can rest assured to shoot straight! (If you don't know the resistance value, you can only try each type) (not applicable to SUV models individually)

After changing the installation of LED lights, the car's trip computer will show that there is a problem with the newly installed LED lights, etc.
In order to solve this problem, the installation of this product can solve the phenomenon of false alarms due to the installation of LED lights in the driving computer car.
When using a resistor to solve the stroboscopic, all the turn signals (the small side lights do not need to install a resistor) change the LED turn lights, you must install a resistor.
It is recommended to use 25W for small lamps with low current demand such as turn signals, reversing lights, rear fog lights, indicator lights, daytime running lights
It is recommended to use 50W for brake lights, front fog lights (change to surround), and other light bulbs with large current requirements
Installation is easy! Put the wire into the button hole of the wire clip, press the button, and then fix the resistor body and it's OK. It's that simple! Can solve the problem of false alarms, false alarms, and stroboscopic (connect resistors in parallel to the positive and negative poles of the alarm stroboscopic bulb)