Matte Frosted Window Film Privacy Sun Blocking Self Adhesive Window Covering Opaque Vinyl Glass Film for Bathroom Office

Small Tips for YOU,please read before buying.

*Please Note that This Window Film Only Applies on Smooth Glass Surfaces.Do not Apply to Outside window or Windows with Crack.

*Don't forget to remove transparent backing side before putting on glass or it will not cling(Use a tape on a corner of the back side (the smooth side) to quickly remove the backing protective film).

*Please use a hair dryer to soften the film under cold weather (Heat Resistant up to 176℉)

Color: Frosted \\ \\ Material: Environmental PVC \\ \\ UV rejection: 95%

Immerse yourself in vast array of color and style choices where there are endless possibilities in combination of fashion and elegance with  window film. No matter you are moving to your new home, or looking for something to refresh your house window ,  offers perfect privacy protection.

Simple Decorations Make the Life Better: Transform Your House to Home

What can this FROSTED window film do for you?

Perfect Privacy Protection: You can fully relax at your home

The new strong glue design will help the mirror window film cling on the window surface firmly and make it available for long time use.

Reuse: No fading, no blistering, detachable, can be re-positioned and reused repeatedly

Save Energy: Summer heat insulation, prevent indoor heat outflow in winter, reduce air conditioning and heating costs

Block UV: Block 99% of UV rays,anti-glare, protect your family and indoor furniture,filter strong light and reduce glare,Will not darken your room

The window film works only on FLAT, CLEAN, and SMOOTH surfaces. It will not stick well on plastic, broken or uneven surfaces.

Installing Instruction

1. Measure the size of your glass and cut film to required size (Around 0.5 inch larger than the glass size).

2. Clean your glass and make sure there is no any oil, glue or dusts.

3. Spray a lot of water on the glass.

4. Peel off the backing film (Don't forget this important step) .

5. Put the film (smooth side) on glass, adjust the position to fit the glass. Squeegee the water and bubbles out. 

6. Trim the film edges with utility knife.

7. Wipe the excess water on the surface of the film.