Continuous Feed Garbage Disposal with Sound Reduction,1/2 HP Food Waste Disposer with Stainless Steel Grinding System

Food Waste Disposal

■ Snap design is easy to install, splash-proof and silent.
■ No blade grinding + deep double layer shredding, safe and more efficient.
■ Pure copper motor with German imported technology, stronger power.
■ Overload protection + high temperature protection, longer life.
■ Daily use, a month of electricity consumption of about 2kWh, ultra-low energy consumption.

Easy Disposal of Many Types of Food Waste

The food waste disposer can handle 95% of food waste such as fruits and vegetables, fruit peels and shells, small bones, small ribs, seafood fish bones, small shells, etc.

Cannot handle: plastic bags, hair, large bones, large shells and non-food waste.

One Click - So Easy

Operation steps.
1. Turn on the water tap.
2. Start the processor with one button.
3. Pour the food waste into the grinding chamber.
4.*Please note: After waiting for the food to be completely ground, continue to keep the faucet on and keep it on for 5 seconds and then turn it off.
5. The machine is set with overload protection device, exceeding a certain load or overheating, the machine will automatically shut down.

Blade Free Grinding System

The garbage disposer's grinding discs feature a bladeless grinding system with built-in 360° free-rotating knockout parts. Their shape determines that the grinding discs are covered with ample knocking points during the machine's telling rotation, which can directly break up food scraps instantly.

Efficient, Safe & Continuous Feeding

The machine is designed with three layers of grinding technology inside, the first layer is a stainless steel grinding disc that easily knocks up food residues. The second and third layers adopt gear structure, which is to deeply cut the residue debris of the first grinding disc, to guarantee that 100% of the residue flowing into the sewer becomes fluid substance and 100% avoid the problem of water pipe blockage.

Thickened Feed Silicone Cover

Weaken the noise and prevent the residue from spattering when grinding.

Energy & Power Saving

The main machine adopts German permanent magnet motor, which provides powerful grinding power and can be loaded with 1000ml at a time. Users in the case of daily use of the machine, 1 month only consume about 2kWH of electricity. Perfectly achieve low energy consumption, save time and energy, and more safety!

Suitable Size

1. The product is suitable for 110mm sink opening.
2. The product comes with air switch as standard, and the recommended installation hole is 28.5~30mm.
3. It is recommended that the bottom thickness of the installable sink be within 10mm.

Easy to Assemble

This product has a screw design that can be installed separately by one adult. Please refer to the instruction manual and product video for installation, which will provide convenience for your installation.

Product Q & A

Q: How can I install the machine if the sink diameter is not 11cm?
A: The machine is suitable for sink diameter of 11cm, if the sink diameter is not suitable, we suggest you can use reducer (reducer ring) to change the sink diameter.

Q: How big is the hole of the air switch?
A: It is recommended that the diameter of the hole in the counter top or wall is 2.8~3cm.

Q: Is the machine easy to install?
A: It is very easy to install, installation requires some force. We simulate the installation steps in the product video, currently more than 99% of buyers can understand the installation steps through the video and instructions, if you find it very difficult, it is recommended to ask a professional for installation.

Q: Is the stone sink suitable for installing the machine?
A: It is recommended to judge by the thickness of the sink bottom, if the bottom thickness is 10mm (1cm) or less, it is possible to install the machine. It is recommended to polish the stone sink mouth smooth before installing the machine.

Q: How can I check if the machine is working properly after I receive it?
A: Please install the air switch of the machine, then plug in the power and press the button, the machine can start or shut down normally.

Q: I received a new machine and found that there are scratches inside the grinding disc, how can I do?
A: The product is inspected at the factory, powered on and the machine is started. Therefore, the grinding disc left working traces, this is a normal situation, buyers can install and use the machine normally, please do not worry.

Q: What should I do if the machine is stuck?
A: A jammed state means that the machine has activated the electrical protection function. Please cut off the power and clean all the residues and foreign objects in the grinding chamber (especially the edge gap), insert and turn the grinding disc with a screwdriver, and finally press the red reset switch lightly and power on to turn on normally.