220V Dimmable COB LED Neon Strip Light 288Leds/M IP67 With Switch/Dimmer EU Plug Flexible Adhesive Tape for Home Garden Lighting

This link has 3 styles of light strips:

-Plug style: No switches or dimmers, can be directly connected to the power supply

-Switch style: There is a switch without a dimmer, and you can directly connect to the power supply

-Dimming style: Dimming the dimmer, adjusting 0 means turning off the power, adjusting 0 and there is also a faint light, please be careful when shooting

If the light strip is used underwater, you need to pay attention to the following:

-Clean the surface‌: Before using waterproof self-adhesive tape, you first need to clean the surface of the area to be waterproofed. This step is to remove dust, grease, moisture and other contaminants on the surface, ensuring that the waterproof tape can be in close contact with the surface to form an effective seal‌

‌-Appropriate Size‌: Cut the waterproof tape to an appropriate length, ensuring that the tape can completely cover the area to be waterproofed, leaving some margin on both sides. The purpose of this is to ensure that the tape has enough coverage to provide complete protection‌

‌-Tight fit‌: Apply the waterproof tape tightly to the area to be waterproofed, starting from one end and slowly smoothing to the other end, making sure there are no bubbles and wrinkles. The tape can be pressed down using a hard object, such as a plastic scraper, to ensure tight contact with the surface‌

‌-Use on top of each other‌: For larger leaky areas, multiple layers of waterproof tape can be used. Each layer of tape should start at the same end and work smoothly towards the other end. Make sure each layer of tape overlaps the next layer enough to prevent moisture from entering through the seams‌

- Please do not put products other than light strips, plugs, etc. in water.

Note：

-COB strip light come with 1pc power plug, come with strong adhesive on the back, no fixed clips.

-Led strip must be light up after unfolded completely, do not light up in a roll, otherwise it will melt and do not work, which may cause safety problem.

-‌The dimmer still has a weak light at 0 luminosity, but it is very small and does not affect the use.

Specifications:

Product Name: 220V COB Led Strip Light with Adhesive Power plug

Type: With switch/ No switch/With dimmer

Input Voltage: AC 220-240V

Plug Type: EU power plug(AC220-240V)

Number Of Leds: 288LEDs/m

Cut Length: 50cm

Light Color: Warm white (3000-3500K), Cold white (6000-6500K), natural white (4000-4500K)

Color Rendering Index: CRI90

Power: 7-10W/m

Strip size: W10mm X H6mm

Beam Angle: 180 degrees

Power Cord Length: With switch 90-100cm, no switch 40-50cm

Waterproof rating: IP67 waterproof(Can be used outdoors)

Features:

*288LEDs/M High density COB, linear lighting, high brightness, uniform lighting, no light spot, high color rendering index CRI90+, protect your eyes，good quality, suitable for engineering decoration.

*Flexible COB LED strip light is strong and bright, made of High Quality silicone material. It has sticky glue on the back, so you can easily install it on clean, dry, and smooth surfaces. Perfect for quick and easy installation!

*Choose from EU-plug models: With on/off switch, or no switch.

*Please note that the model with the dimmer may exhibit slight flickering, but it doesn't compromise its functionality.

Applications:

Widely applied against light for traffic sign letters.

Applicable for car decoration, outline lighting or edge lighting.

Illuminates varied domestic life, diy lights for corridors, stairs, paths, Windows.

It illuminates the use of colorful decorations for hotels, theaters, clubs, shopping malls, festivals and shows.

Package include:

1 x COB led strip

1 x With switch/ No switch/With dimmer AC to DC power plug

1.With Power Plug

-No switch,no dimmer

2.With Switch Plug

-No dimmer

3.With Dimmer Plug

-Dimmable

Widely applied against light for traffic sign letters.

-Applicable for car decoration, outline lighting or edge lighting.

-Illuminates varied domestic life, diy lights for corridors, stairs, paths, Windows.

-It illuminates the use of colorful decorations for hotels, theaters, clubs, shopping malls, festivals and shows.

INSTALL CORRECTLY

-When lighting up the light strip, please make sure the light strip is connected correctlyand the head and tail anti-leakage protection sleeves are correctly installed to prevent thelight strip from burning out or causing danger due to leakage.

PRODUCTCOMPARISON

-Comfortably glows without dark spots, illuminating the entire room.

Light Color: Warm white (3000-3500K), Cold white (6000-6500K), natural white (4000-4500K)

Dimming style allows dimming of the light strip, 20% 40% 60% 80% 100%

Dimming style allows dimming of the light strip, 20% 40% 60% 80% 100%

-- It should be noted that the other 2 styles can be dimmed, but there is no dimmer

- Adjust the dimmer to a minimum or display a weak brightness, this is not a problem with the light strip quality

The actual picture of the light strip is as follows

-288LEDS/M WARM LIGHT

-288LEDS/M NATURAL LIGHT

-288LEDS/M WHITE LIGHT

Cutting Surface Size:10*6mm

Cutting size:50cm

220V COB 288LEDS/M

-Super bright lamp beads.288LEDs/m,illuminate the whole room.

STRONG DOUBLE-SIDED ADHESIVE

-Stronger adhesion, easy and quickinstallation

CUTTING SIZE: 50CM

-Every 50cm can be cut to form a new light strip, which can be suitable for most scenes.

SUPPLY CONNECT

-Please checkwhether the installation iscorrect before connecting to avoid damage to the light strip.

Contrast infographic of three colors

no Switch plug

OUTER PROTECTIVE LAYER

-High brightness light strip, soft and bendable

COB LIGHT STRIP

-Brighter than ordinary light strips, 288LEDs/m,illuminating your worid.

-IP67 Waterproof

The light strip is waterproof, but please note that the light strip is used outdoors. Be sure to use a waterproof plug to avoid accidents.

CONNECTION METHOD（Easy and fast installation, suitable for use in a variety

of scenarios.）

-Looking for light strips and snap connectors.

-Press positive and negative to access and press the buckles

-Connection is completed.

Please do not light it up in a roll to avoid accidents caused by poor heat dissipation of the light strip.

no Switch style

with Switch style

With Dimmer style