Diving Flashlight 3000LM CERR LED focus long waterproof night submersible fishing IPX8 outdoor underwater strong penetrati

Specifications:

Name:B100

Diving Flashlight Material:Aluminum alloy + High density hard plastic

Emittter type: 1 x CREEL2 LED

Battery configuration: 1 x26650 battery (built-in)

Brightness:3000 lumens maximum brightness

Waterproof:underwater100 meters

Beam angle: about 56 degrees

Switch:high light/low light

Weight:358g (built-in battery)

Shell color: Yellow

Scope of application: diving, fishing

Operation Instruction:

The side switch to control all function:

●Click to open flashlight, high-low

● Turn the switch to the right to lock the

switch, you don’t have to worry about water pressure when

diving

Packing list:

1 x A7 Diving Flashlight (built-in battery)

1 x O-rings

1 x USB Charging Cable

1*Waterproof glue

Name:P100

Diving Flashlight

Material:

Aluminum alloy + High density hard plastic

Emitter

type: 1 x CREEL2 LED

Battery

configuration: 3 x18650 battery (built-in)

Brightness:

3000 lumens maximum brightness

Waterproof:

underwater: 100 meters

Beam angle: about 56 degrees

Switch:high light/low light

Weight:

512g (built-in battery)

Shell

color: Yellow

Scope

of application: diving, fishing

Operation Instruction:

The side switch to control all function:

● Click to open flashlight, high-low

● Turn the switch to the right to lock the switch, you don’t have to worry

about water pressure when diving

Maintenance Tips:

1.You need to tighten the body of the flashlight and

the lamp head.

2:Note that the flashlight is very powerful and

requires a lot of current. It is recommended to use a power battery, the

battery discharge rate can reach 3C/ 5C

If your battery current is very small, the white light of the flashlight will

not work.

3:Appearance precautions, the flashlight supports the use of a pointed battery,

the flat battery cannot touch the circuit board, and the flashlight cannot be

used normally

4.Do not shine the light beam directly into eyes.

5.Do not installing the battery reverse polarity.

6.After use you should wash your diving lights

thoroughly in fresh water along with the rest of your equipment.

7.Clean, lubricate and inspect the O-rings,that would

better for the flashlight's long-term use.

8.Clean the battery and electrical contacts.

9.Store your scuba diving lights without their

batteries to prevent any possible corrosion from battery leakage.

10.Always recharge the battery when the light goes

dim, thus overwork of batteries can be avoided and lifetime could be extended.

11.Store your dive lights in a cool dry place out of

direct sunlight.

Packing list:

1*Professional diving flashlight (built-in battery)

1*rope

2* "O" type waterproof ring

1*Waterproof glue