Dental Restoration Syringe Universal Color Shade Dentistry Enamel Material Aesthetics Composite Resin Compressive Strength

Scope：Anterior and posterior direct and indirect restoration
Specifications：2g/ syringe
Shades：
A1、A2、A3、A3.5、
Our strengths
GOOD OPERABILITY：Curing depth ≤3mm，easy curing,non-stick instruments,easy plasticity.
GOOD VERSATILITY：Both the pertormance of restoration of anterior//posteriorteeth, dentin/enamel.
HIGH MECHANICAL STRENGTH：Flexural strength≥ 140Mpa, compressive strength > 290Mpa.
GOOD POLISHABILITY AND WEAR RESISTANCE：Closer to the original state of the teeth.
X-RAY BLOCKING PROPERTY：Convenient for clinical observation.
FILLER LEVEL：Inorganic filler volume percentage 78.4%，particle sizedistribution 0.04-3.0μm
COMPLETE COLOUR CODE：After light curing,match all 16 colours in VITAcolorimetric plates.
LOW POLYMERISATION SHRINKAGE：Polymerisation shrinkage rate <2.2%.
FRESH AND NATURAL：No bad smell.

Product parameters
Scope：
In intraoral prosthesis or orthodontic treatment,etchant gel is used to treat the surfaces of teeth,metal, ceramic and other
prostheses to remove the contaminated layer, rough surface and improve their surface properties.
Specifications：2.5ml/syringe
Color：Dark blue
Model： AT-37(H3PO4-37%)
Our strengths
GEL-LIKE CONSISTENCY：Preventing unintended flows to reduce risk
EASY TO OPERATE：Easy to be coated
EASY TO CLEAN：Hydrophilic formula for residue-free cleaning
DARK BLUE DESIGN：Easy to identify,no dead space for cleaning
SHORT TIME FOR ETCHING：Rapid surface treatment using phosphoric acid as an effective acid etching factor.
VARIOUS CONCENTRATIONS：A wide range of concentrations to suit different habits or neds

Scope：
Cementation of stainless steel or metal-porcelain crowns,bridges,inlays,posts and screws.
Cementation of all ceramic (zirconia-based) crowns and bridges.
Cementation of orthodontic parts to metal crowns, and orthodontic bands. Base and bottom.
Specifications：powder:8g , liquid:4g
THE POWDER IS UNIFORM AND FINE：
Fine and smooth powder is easy to mix, and the mixed material has excellent fluidity.
THIN FILM THICKNESS：
Thin film thickness(≤18μm)is convenient for restoration in place.
EXCELLENT ADHESION AND SEALING：
Good adhesion to tooth tissue and restoration with good edge sealing effect.
GOOD BIOCOMPATIBILITY：Coefficient of thermal expansion similar to tooth tissue reduce postoperative sensitivity.
EASY TO OPERATE：Ample working time,fast intraoral curing speed and low solubility.
LONG-TERM FLUORIDE RELEASE：Long-term fiuorine release and anti-caries effect.

Product parameters
Scope：Pit & Fissure Sealant is designed for sealing the enamel pits and fissures of teeth to aid in the prevention of carries.
Specifications：3g/syringe
Color：White
Product parameters
PAPID CURE：The curing time is only 20 seconds
LOW VISCOSITY：Viscosity < 2000cp
CONVINIENT OPERATION：Needle design, easy coating
CLINICAL VERIFLCATION：Has the excellent pit and fissure sealing effect
GOOD STRENGTE：Flexural strength ≥130 and compressive strength ≥ 120 after curing

Scope：
Restoration of minimally invasive non stress-bearing cavity
Base/liner under direct restorations
Repair of small defects in esthetic indirect restorations
Pit and fissure sealant、Undercut blockout
Repair of resin and acrylic temporary materials
Specifications：3g/syringe
Shades：A1、A2、A3、A3.5、
Our strengths
VERSATILITY OF USE：High-quality products new energy,a wide range of use
EXCELLENT FLOWABILITY：Full penetration,extension effect, adapts to small crevices.
VARIOUS COLORS AVAILABLE：Perfectly match tooth color
STRONG ANTI-WEAR ABILITY：Closer to the original condition of the teeth.
LOW POLYMERISATION SHRINKAGE：Polymerisation shrinkage rate<2.4%
X-RAY BLOCKING PROPERTY：Convenient for clinical observation.

Product parameters
Scope：Permanent cementation for all types of fiber posts
Specifications：8g/syringe (With 5 mixing tips)
Color：Pale yellow
Our strengths
DUAL CURING：Self curing and light curing for more complete curing
IT` S VERY ADAPTABLE：All crown and core reconstructions and fiber post cementation
GOOD MECHANICAL PROPERTIES：Flexural strength≥130Mpa, compression strength≥260Mpa
TWO-COMPONENT DESIGN：The intraoral injection head can be operated more precisely in the mouth
FAST CURING SPEED：It will completely solidify after 20 seconds of light
STRONG ADHESIVE PROPERTY：form a strong cementation with dentin and fiber post

Product parameters
Scope：All types of light curing composites
Specifications：5ml/bottle
Color：Pale yellow
Our strengths
TOTAL ETCHING ADHESIVE：Fifth generation bonding technology
BOTTLE DESIGN：Can be freely proportioned,cost-effective
SINGLE COMPONENT：Unique single-component design,easy to operate
WIDE RANGE OF USES：Suitable for a variety of light-cured composite materials,repair filling materials
EXCELLENT ADHESION STRENGTH：The adhesive strength is≥18Mpa
THIN THICKNESS：Small bonding gap after smearing