10pcs Multifunctional Wall-Mounted Round Hooks Free Punching Seamless Paste Storage Rack Kitchen Bathroom Household Ring Hange

Note:

The core reasons for the sticky hook not sticking firmly are unclean/moist walls, insufficient air exhaust, no standing for curing, or unsuitable wall material;

The solution requires three steps: "cleaning and drying → heating and pressing → standing and curing"

Immediately take remedial measures and follow the correct re-application steps

1. Thoroughly clean the wall surface: Wipe the installation area with alcohol or degreasing cleaner to remove oil stains, dust, and soap scum, and then dry it

Wipe it dry with a cloth to ensure it is completely dry and free of moisture.

2. Treat the adhesive surface of the hook: If the old adhesive layer of the hook is aged, scrape off the residual adhesive; before pasting, you can heat the adhesive surface with hot air from a hair dryer

Let it soften and activate for 10-15 seconds (this is especially important in winter).

3. Standardize the pasting method: After tearing off the protective film, align the position and paste it down in one go. Repeated movement is strictly prohibited; use the palm of your hand to press from the middle

Press firmly around for more than 30 seconds to expel all air.

4. Key: Allow at least 24 hours (48-72 hours recommended for humid/winter conditions) after application before hanging heavy objects

The substance allows the colloid to fully crosslink and solidify.