JAYO 10rolls 1.75mm PETG/PLA/PLAPLUS/PLAPLUS2/ABS/PLA Matte/HS-PLA/Silk Filament 3d Printer For 3D Printer&3D Pen DIY

1：PLA Meta Filamnet

JAYO PLA Filament 1.75mm, Upgraded PLA Meta 3D Printer Filament, Diameter Accuracy ± 0.02mm Neatly Wound Filament, High Fluidity, Fast Print 3D Printing Filament, 1/1.1KG Spool

PLA META Filament Features

1. Environmental protection, non-toxic, biodegradable;
2. Soft and warm colors
3. Low shrinkage rate;
4. High strength and rigidity;
5. Very good toughness, not easy to break
6. The printing temperature is 180~200°. Lower printing temperature, means more energy saving and environmental protection, reduce printer loss.
7. Good fluidity: The printing fluency is better than the existing PLA and PLA+, greatly improving the printing success rate.
8. Good fall resistance and impact resistance: After the fall test, the fall resistance is about one times better than the existing PLA and PLA+.

PLA META Filament Parameter

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 180-200℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles

2：PETG Filament

JAYO PETG 3D Printer Filament Bundles, PETG Filament 1.1KG Cardboard Spools 1.75mm, Consumable Dimensional Accuracy +/-0.02mm

PETG Filament Features

1. Environmental protection and non-toxic;
2. Low shrinkage;Bright color;High transparency and good gloss.
3. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent, weather resistance, and good adhesion.
4. Good dimensional stability, no cracks And warping.
Suitable for all types of FDM3D printers, suitable to Co-print all kinds of commonly used models, crafts, industry Pieces, advertising words, etc.

PETG filament is easy to use like PLA, durable strength like ABS

PETG Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

3：PLA Filament

PLA 3D Printer Filament, JAYO Neatly Wound PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Fit Most FDM 3D Printers, Good Vacuum Packaging Consumables, 1/1.1kg Spool

PLA Filament Features

1. Environmental protection , non-toxic , biodegradable ;
2. No Bubble , Low shrinkage , bright color ;
3. High strength and strong rigidity ;

It is suitable for all types of FDM3D printers , suitable for printing crafts , artworks and industrial design samples, etc.

PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.

PLA Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

4：SILK PLA Filament

Silk PLA Filament, JAYO Neatly Wound Shiny PLA 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Fit Most FDM 3D Printers, Good Vacuum Packaging, 1.1/1kg Spool , Silky Black

SILK Filament Features

1. Environmentally friendly, non-toxic, biodegradable;
2. Close to silk effect;
3. Low shrinkage
4. Toughness 50 times higher than PLA on the market
5.Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable Co-print crafts, artwork, industrial design samples And product models with higher toughness requirements, etc.

silk filament brings arts & crafts and 3D projects smooth shiny silk-like surface

SILK Filament Parameter

Diameter：1.75±0.02MM
Print Temp.：200-230℃
Platform Temp.：Alternatives 60-80℃
Print speed：30-60MM/s

5：PLA PLUS Filament

JAYO 3D Printer Filament PLA Plus 1.75mm, JAYO Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1/1.1 kg Spool

PLA+ Filament Features

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;

PLA PLUS is 10 times higher toughness than PLA and has excellent toughness.

PLA+ Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 210-235℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

6：TPU Filament

JAYO 3D Printer Filament

PLA+ Filament Features

Wire diameter: 1.75/3.0MM
Tolerance: ±0.03MM
Printing temperature:
190-210℃: 50-80mm/s
210-230℃: 80-120mm/s
Bottom temperature: 50-60℃
Bubble: 100% zero bubble
Net weight: 0.5KG
Gross weight: 0.8KG/roll
Length: 1.75MM(0.5KG)=165M,
3.0MM(0.5KG)=57M
Hardness: 95A

7：PLA PLUS+2.0 Filament

JAYO 3D Printer Filament PLA Plus 1.75mm, JAYO Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1/1.1 kg Spool

PLA+ 2.0 Filament Features

Features:
1. Good impact resistance, resistant to falling and smashing
2. Supports 300MM/S fast printing;

Commonalities:
1. Neat wiring without knots,
2. Easy to print with good compatibility,
3. Environmentally friendly, non-toxic and completely degradable
4. Low shrinkage, no cracking or warping when printing

PLA PLUS is 10 times higher toughness than PLA and has excellent toughness.

PLA+ 2.0 Filament Parameter

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Bottom temperature: 50-60℃
Bubble: 100% zero bubble
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=330M,
Printing speed: 190-210℃ 50-150mm/s
210-230℃ 150-300mm/s
230-260℃ 300-600mm/

8：PLA MATTE Filament

JAYO 3D Printer Filament PLA MATTE 1.75mm, JAYO Neatly Wound PLA Filament 1.75mm PRO, Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1/1.1 kg Spool

PLA matte Product Parameter:
Wire diameter: 1.75mm
Tolerance: ± 0.02MM
Printing temperature: 205-215 ℃
Bottom plate temperature: Apply glue when not heated
Heating 50-60 ℃ without applying glue
Printing speed: 50-100MM/s
Bubble: 100% zero bubble
Net weight: 1.1KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM (1KG)=330M

8：ABS Filament

ABS

Wire diameter: 1.75/3.0MM
Tolerance: ±0.03MM
Printing temperature:
250-260℃: 50-100mm/s
260-280℃: 100-200mm/s
Bottom temperature: 80-100℃ (with insulation chamber)
Printing speed: 40-60MM/s
Bubble: 100% zero bubble
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=395M
3.0MM(1KG)=130M

Neatly Wound Filament

JAYO has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of JAYO PETG/PLA+/WOOD/SILK PLA filament with few knots, avoiding possible breaks.

Environmental friendly

Environmental friendly, non-toxic and biodegradable，made mainly of core starch and do no harm to environment
（Filament: PLA/PETG/PLA+/SILK）

High Dimensional Accuracy & Consistency

Advanced CCD Diameter Measuring To Guarantee Dimensional Accuracy And Consistency,They can increase your 3D printing delicacy.

Vacuumed Sealed Packaging

JAYO 3D filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle jams and yield smooth 3D models.

Shipping

* You can check parcel tracking information through this ways:

1.https://www.17track.net

2.http://track.4px.com

3. Leave a message to us, then we will check the parcel information for you.

After Sale

*We offer a one-year warranty for electronic products , but damage caused by using non original brand filament or not following the instructions correctly is not covered by the warranty.

*Please provide us with the proof of video if products have any problem after receiving the parcel within 7 days, we will offer replacement or refund after confirming the problem.

Contact Us

*If satisfied with our product, please kindly leave us a positive feedback and 5 stars.

*If any questions, you may contact our customer service in 24 hours before negative feedback. We'll try our best to help you.

We look forward to cooperating with you next time!