Sovol SV08 Core-XY 3D Printer Open Source, Max 700mm/s High Speed 3D Printers with 300℃ Clog-free Hotend and Camera

[Core XY 700mm/s Max Speed] 

SVO8 utilizes CoreXY kinematics todecrease moving mass and enhancemotion control, consequently boosting maximum 40000mm/s² acceleration. With a generous printing volume of 350x350x345mm, the expansive space allows for the full expression of creativity, unbounded by the limitationsof smaller printing volumes.

[Open Source] 

From the beginning of research and development, we decided to make SVO8 open-source. Besides, open-Sourced OrcaSlicer offers arc fitting, variable line width, and spiral ascent. It also includes intelligent cooling, overhang speed reduction, and segmented retraction. The software optimizes nozzle paths for faster printing and features a user-friendly, categorized interface with clear content for easy operation. As an open-source slicer, it supports configurations for various printer brands.

[Quad-Gantry Auto Leveling] 

The entire gantry system can be smoothly leveled with 4 independent Z motors. This process, known as Quad-Gantry-Leveling (QGL), enhances printer accuracy, reducing the possibility of print failures. It can also detect and compensate for wear or damage. Say goodbye to the hassle of manual leveling, SV08 comes with pressure sensor to automatically adjust the distance between the nozzle and the buildplate, ensuring the optimal first-layer print quality right after a quick test print.

[Refine Details With Klipper] 

SV08 adopts the Klipper firmware to elevate printing speed and accuracy to the next-generation standards. This firmware not only enhances processing speed significantly but also enables users to minimize vibration patterns using 'input Shaping', ensuring flawless prints from one corner to the other with 'Pressure Advance', and helping reduce temperature fluctuations in the nozzle and heat bed through 'PID Tuning', etc.

[Ceramic Heating Block & AC Power Heated Bed] 

Our high-performance SV08 3D printer heats up rapidly, reaching 300°C quickly and 220°C in 40 seconds. Using ceramic heating block & AC heated bed reduce heating time by 70%, allowing almost instant printing and easy preheating for nozzle cleaning and leveling. Enjoy precise, high-quality prints with versatile material compatibility.

[Rapid Filament Cooling] 

SV08 is equipped with a 5020 fan (10000r/min) and a 3010 fan (15000r/min) to provide cooling for the filament. The airflow, optimized through the air duct, blows from three sides towards the filament, ensuring that it remains sufficiently cooled even during rapid printing. This also helps in improving the overall print quality by reducing warping and improving overhangs.

[All-axis Linear Rails] 

SVO8 utilizes linear rails for all 7 axis (4Z+2Y+1X) to improve precision and resistance to axial movement deformation.The provision of smooth and precise linear motion is crucial for producing high-quality prints.