JAYO 3D PLA / SILK / PLA META / PETG / PLAMatte / ABS / High Speed PLA/ PLA PLUS 3D Filament 1.75mm Printer Filament 1.1KG/Roll

1.PLA Filament Features & Parameter:

PLA Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and strong rigidity;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork and industrial design samples
Grade

PLA Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-210℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

2.PLA PLUS Filament Features & Parameter:

PLA PLUS Filament Features :

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;
6. 10 times higher toughness than PLA on the market
Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable
Co-print crafts, artwork, industrial design samples
And product models with higher toughness requirements.

Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 205-215℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

3.PETG Filament Features & Parameter:

PETG Filament Features:

1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent
The toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks
And warping.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable
Co-print all kinds of commonly used models, crafts, industry
Pieces, advertising words, etc.

PETG Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 230-240℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M

4.PLA Matte Filament Features & Parameter:

PLA matte Filament Features:

Wire diameter: 1.75mm
Tolerance: ± 0.02MM
Printing temperature: 205-215 ℃
Bottom plate temperature: Apply glue when not heated
Heating 50-60 ℃ without applying glue
Printing speed: 50-100MM/s
Bubble: 100% zero bubble
Net weight: 1.1 KG/roll
Gross weight: 1.3 KG/roll

PLA matte Product Parameter:

1. Environmentally friendly, non-toxic, and biodegradable;
2. The printing has no odor, a matte surface, and a good texture,
3. Low shrinkage rate;
Suitable for all models of FDM3D printers, suitable for printing handicrafts, artworks, and industrial design samples, etc

.HS-PLA Filament Features & Parameter:

HS-PLA Filament Features :

Wire diameter: 1.75/3.0MM
Tolerance: ± 0.02MM
Printing temperature: 205-215 ℃
Bottom plate temperature: 50-60 ℃
Printing speed: 50-300MM/s
Bubble: 100% zero bubble
Net weight: 1. 1KG/roll
Gross weight: 1.3 KG/roll

HS-PLA Filament :

1.【Print Faster】 -JAYO high-speed 3D printer PLA filament, designed to turbocharge your printing from slow to swift. Experience a colossal 500% increase in flowability, ensuring smooth printing even at speeds exceeding 250mm/s, without clogs or filament shortages. Bring your ideas to life with high-speed printing, on average, save 70% printing time.

2. 【Efficient Cooling】 -High speed PLA filament boasts a 180% boost in heat dissipation, enabling quicker cooling and curing than regular PLA filament under the same conditions. This prevents 3d filament material buildup during fast prints, improving printing speed while also ensuring accuracy and mechanical performance.

3.【High Speed PLA Printing Tips】 -The average printing temp of JAYO High Speed PLA filament is lower than regular PLA filament, saving time and energy consumption. As HS PLA Filament is temperature-sensitive, please set slicing parameters according to recommended print speed and temp matching based on your 3D printer. If stringing occurs, please reduce print temp appropriately.

PLA Meta Filament Features & Parameter:

PLA Meta Product Parameter:

1. Environmentally friendly, non-toxic and biodegradable
2. High strength and rigidity
3. Soft and warm colors
3. Low shrinkage
5. 【Good toughness, not easy to break easily】: The toughness of PLA Meta is similar to the existing PLA+, it achieves high purity, low shrinkage and excellent layer adhesion, meeting your needs for higher quality functional parts printing projects
6. 【Printing temperature 180~200° (reduced and printing temperature range increased)】:
* Lower printing temperature means more energy saving and environmental protection, reducing printer loss.
* The wider printing temperature range means that customers have a larger operating space, and the printing failure rate caused by improper temperature settings is greatly reduced.
7. 【Not easy to draw】: The printing model effect is better than our current PLA and PLA+. The surface of the model has a good visual effect and is not easy to draw. This is especially noticeable when printing suspended models.
8. 【Good fluidity】: The printing fluency is better than the existing PLA and PLA+, which greatly improves the printing success rate

PLA Meta Product Parameter:

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 185-195℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles
Net weight: 1.1KG/roll,0.65KG/roll

SILK PLA+ Filament Features & Parameter:

SILK PLA+ Filament Features:

(1) Wire diameter: 1.75MM

(2) Tolerance: ±0.02MM

(3) Printing temperature: 205-215℃

(4) Bottom plate temperature: need to apply glue when not heating

Heating 60-80℃ without glue

(5) Printing speed: 30-60MM/s

(6) Air bubbles: 100% zero air bubbles

SILK Filament Features:

(1) Environmentally friendly, non-toxic and biodegradable;

(2) close to the silk effect;

(3) Low shrinkage

(4) 50 times higher toughness than PLA on the market

(5) The printing is smooth, and the surface of the finished product is smoother and more delicate