12V DC 3-Inch In-Line Bilge Blower Fan, 130 CFM Marine Ventilation Fan, 2.5A Max Current

This 3-inch in-line blower fan is designed for ventilation applications in suitable boat compartments. Its compact design allows it to be installed in a compatible ventilation duct system to help move air through the designated space.

With a 12V DC power supply and a manufacturer-rated airflow of 130 CFM, this blower is intended for installations where its size and electrical specifications meet the system requirements.

Key Features

• 12V DC Operation — Designed for use with a compatible 12V DC power supply.

• 3-Inch Air Intake — Suitable for compatible 3-inch ventilation duct systems.

• Rated Airflow of 130 CFM — Manufacturer-rated airflow; actual airflow may vary depending on duct length, installation configuration, and system resistance.

• Maximum Current Draw of 2.5A — Check that your power supply, wiring, and circuit protection meet the product requirements.

• ABS Thermoplastic Housing — Constructed from ABS thermoplastic, as specified by the manufacturer.

• Multi-Blade Fan Design — Designed to move air through the ventilation system.

• Mounting Feet — Allows mounting in orientations supported by the manufacturer's installation instructions.

Specifications

• Operating Voltage: 12V DC

• Rated Airflow: 130 CFM

• Maximum Current Draw: 2.5A

• Intake Diameter: 3 inches / 76 mm

• Housing Material: ABS Thermoplastic

• Weight: Approx. 1.1 lbs

Potential Applications

• Suitable boat ventilation duct systems

• Other compatible ventilation installations, subject to the manufacturer's specifications and applicable safety requirements

Important Notes

• Please verify the duct diameter, available mounting space, voltage, and electrical requirements before purchase.

• Install and operate the blower according to the manufacturer's instructions.

• This product should not be assumed to be waterproof, ignition-protected, or suitable for every engine compartment unless supported by documentation for the exact model.

• If installation is intended for a gasoline engine compartment or an area where flammable vapors may be present, verify the applicable ignition-protection requirements before use.

• Ensure that wiring and circuit protection are appropriate for the product's electrical specifications. Disconnect the power supply before installation or maintenance.