Creality K2 Plus Combo 3D Printer Multi Color Printing with New CFS Max 600mm/s Printing Speed Full-auto Leveling

K2 plus Combo Description:

A King-sized & Quiet Powerhouse:As a pro-level 3D printing powerhouse, K2 Plus offers an extraordinary 350*350*350mm build volume,  great for handling larger objects or larger batches. It is the first desktop 3D printer that uses industry-grade FOC step-servo motors on all axis. Notably, each motor offers 32,768 controllable micro-steps per revolution*. No bumps while printing at a 600mm/s speed and 30000mm/s² acceleration. Not only this, it takes on a rigid all-metal "exoskeleton", extremely robust XYZ axis, and a tight enclosure. The working noise at 300mm/s is only 45dB, no louder than someone typing on a laptop PC. No doubt, it is a creative beast you can work next to.

Master of Materials & Print Quality: The active chamber heater is adopted for up to 60°C temperature inside, which is golden to forge strong prints in ASA, PPA, and other high-end materials. The "Apus" direct drive extruder assembly allows for 350 printing with a max 40mm³/s flow and it is clog-free & easy to maintain. The nozzle tip is made of hardened steel to deal with wear-resistant engineering materials. Vibrations are minimized with a heavy-weight build and the input shaping algorithm. The dimensional accuracy of prints reaches 0.05mm. Meanwhile, there are two chamber-side auxiliary cooling fans for perfect part cooling. The shapes and styles will be set before any stringing and warping can happen.

Dual AI Cameras & Automation:K2 Plus features 18 smart sensors. Everything is automated and closely monitored. It has two AI cameras. One is on the chamber side to watch over spaghetti failure, idling, etc. Another is on the toolhead for flow rate optimization. No more underfeeding and overfeeding. With two Z-axis independently motorized, it can auto-adjust bed tilt before auto leveling. So, everyone can get an expert-level first layer hands-down. It will also exceed your expectations with active belt tensioning.

Easy Like a Household Appliance:The printer is pre-assembled, so you can use it right after unpacking and screen installation. Then, a boot-up quick guide covers self-tests such as leveling and fan calibration. The built-in belt tension sensor can get the belt tension checked and rigged actively. The printer also comes with an air purifier, an RFID filament reader, Ethernet + Dual-band Wifi, and 32G large ROM. All things are considered for carefree use.

Epic Renewal of Software Ecosystem:

The built-in Creality OS is profoundly evolved. It features smart multi-filament management and allows for fine-tuning in the expert mode or with root access. FLUIDD WebUI is also supported for your convenience. Meanwhile, the Creality Print 5.0 slicer has been completely rebuilt. It offers an all-new UI, 40+ filament presets, multi-printer control via LAN, and the ability to slice multicolor 3MF models.  If you want to download third-party models or share your works with others, Creality Cloud is your go-to community.

Colorful Creativity with All-new CFS:One CFS can house four filament spools. With four CFS units hooked together, it is possible to deliver 16-color 3D prints, saving the need for painting afterward. By creating snap-away or water-soluble supports, the post-processing becomes a breeze. CFS is intelligent with automatic filament selection, switch, and relay. Upon loading an RFID filament, it can read the color and type instantly. When a filament is running out, it can relay with a similar one installed. Minimal interruption and waste. CFS is also nice for filament storage. It features an air-tight design with a temperature and humidity display and includes a spring-loaded batten bar to keep the spool from jumping out of the slot.