12V 24V Solar Battery Box Kit With 1.2M 3M 4.2M Wire 1.3W 2.8W 6W 13W 8 Lighting Mode Solar Panel for LED String Light COB Strip

Notice:

- When the package arrives, please charge it fully before using it. After full charge, please connect to the light strip in a place without direct sunlight.

-Sun charging or USB charging

Specification:

Output voltage: 24V

Solar panel: 1.3W/2.8W/6W/13W

Light control: photosensitive through the solar panel, automatically light up when it is dark

Lighting mode: 8 types

Main material: ABS

Control box size:As Picture

Operation temperature: -20℃-+45℃

Storage temperature: -20℃-+60℃

View angle: 180

24V 0.5m-2m  COB LED Strip for 1.3W controller

24V 3m-5m  COB LED Strip    for  2.8W controller

24V 6m-10m  COB LED Strip  for 6W controller

12V  0.5M-5M  COB LED Strip  for  6W controller

2Pcs 24V 0.5M-10M COB LED Strip  for  13W controller

Use: lt can be used for 100LED or 200LED solar string lights. Solar light strings. Solar copper wire light strings.

Instruction: Comes with solar panel integrated control box. With remote control. The lighting mode can be set by remote control

Package Included:

1.3/2.8/6W-No Cord

①Installation screws

② USB charging

③ 1.3/2.8/6W Solar Panels

⑤ Swivel Bracket

⑥ Ground Rod

1.3/2.8/6W-1.2M Cord

①Installation screws

② USB charging

③ 1.3/2.8/6W Solar Panels

⑤ Swivel Bracket

⑥1.2M Waterproof connector wire

⑥ Ground Rod

1.3/2.8/6W-3M Cord

①Installation screws

② USB charging

③ 1.3/2.8/6W Solar Panels

⑤ Swivel Bracket

⑥ 3M Waterproof connector wire

⑦ Ground Rod

1.3/2.8/6W-4.2M Cord

①Installation screws

② USB charging

③ 1.3/2.8/6W Solar Panels

⑤ Swivel Bracket

⑥1.2M Waterproof connector wire

⑦3M Waterproof connector wire

⑧ Ground Rod

13W-Dual Output-1.2M Cord

①Installation screws

② USB charging

③ 13W Solar Panels

⑤ Swivel Bracket

⑥ Ground Rod

⑦ 2Pcs1.2M Waterproof connector wire

12V 6W With Remote

①Installation screws

② USB charging

③ 6W Solar Panels

⑤ Swivel Bracket

⑥ Ground Rod

⑦ Remote（No Battery）

24V 2.8W With Remote

①Installation screws

② USB charging

③ 2.8W Solar Panels

⑤ Swivel Bracket

⑥ Ground Rod

⑦ Remote（No Battery）

Solar-Powered Light Instructions

1. Automatic Light & Charge Control (This product features a built-in light sensor):

1） During Daylight: The light will automatically turn OFF and the solar panel will charge the internal battery using sunlight.

2）At Dusk/Night: The light will automatically turn ON using the energy stored in the battery during the day.

2. Testing During Daylight:

If you need to check the Solar-Powered LED Strip Light during daylight hours.You must completely cover the solar panel (e.g., with thick cloth, or cardboard). Otherwise, the solar panel won't work to light up the LED strip.

The solar panel is covered with the item while use (simulating a dark environment), the light will switch on within a few seconds.

3. Charging via USB:

The solar panel is unaffected by light during charging the product using the USB cable (connected to a power adapter). There is no need to cover it to make the light work during the day.

Installation Tips:

1.Place the solar panel where it receives direct sunlight for maximum charging efficiency.

2. Ensure the solar panel is clean and free from shade (trees, buildings, etc.) for optimal performance.