3kg ANYCUBIC Standard UV Resin For Photon 3D Printer Photon Printing Material Figurine Models LCD UV Sensitive Normal Liquid

ANYCUBIC Photopolymer Resin 405nm UV Resin

Specification:

♦ Hardness: 79 D
♦ Viscosity(25℃): 552 mpa.s
♦ Curing wavelength: 405 nm
♦ Liquid density: 1.1
♦ Solid density: 1.184 g/cm⊃3;
♦ Shrinkage: 7.1%
♦ Tensile strength: 23.4 Mpa
♦ Curing time: 6-10 s
♦ Elongation at break: 14.2%
♦ Shelf life: 1 year

Terms and Conditions:

Shake well before use,please wear a glove mask,the recommended temperature 20-25 ℃, to avoid dust and the environment.

Precautions:

This product can not be taken orally. Keep away from children. Do not enter the eyes. In case of accidental contact, flush with plenty of water as soon as possible. If not, consult a doctor promptly.

Save notes:

It is recommended to store at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed, dusty or damp, affecting print quality. Shading preservation, the sun contains a lot of ultraviolet light, will cure photosensitive resin.

High Precision

Low shrinkage,dimensional stability when printing.The model has high precision and clear details.

Quick Curing

ANYCUBIC UV resins can be rapid prototyping. It has been developed to reduce the forming time.

Rigid & Toughness

Appropriate toughness.ANYCUBIC UV resins have good combination of hardness and toughness,which brings easy removal of model and fine printing details.