Pa Nylon Polyamide 3D Filament Printer 1.75 mm 1 -f- 75 1kg 10m 100g Diy For Shipping Thread White Nature Color
3.86$
3.66$
Quantity:
1
Availability:
Color
Ships From
Card Payments
Crypto Payments
Easy return
Reliable Shipping
Pa Nylon Polyamide 3D Filament Printer 1.75 mm 1 -f- 75 1kg Diy For Shipping Thread White Nature Color
Nylon (PA) Filament Introduction:
Nylons are condensation polymers or copolymers, formed by reacting difunctional monomers containing equal parts of amine and carboxylic acid, so that amides are formed at both ends of each monomer in a process analogous to polypeptide biopolymers.
Nylon possesses great mechanical properties, and in particular, the best impact resistance for a non-flexible filament. Layer adhesion and absorbs moisture can be an issue, however.
OPY Nylon (PA) Main Features:
1. Good wear resistant:
Suitable to print gear or other industrial parts.
2. Relative flexible:
Able to be bend to certain angles.
3. Wide range temperature from 230 ℃ ~250 ℃:
Suitable for assorted 3D printer, Makerbot, UP, Luzbot, Leapfrog, Reprap, Ultimaker, Mendel, Prusa, Raise3D and etc.
4. Good toughness:
Better than PLA.
OPY Nylon Specification:
1. Material: Nylon
2. Color: Nature, White, Black
3. Filament Diameter: 1.75mm
4. Tolerance: ±0.05mm
5. Print Temperature: 220~250℃
6. Infill Speed: 20-50mm/s
7. Heat-Bed Temperature: 70-100℃
8. Net Weight: 1KG
9. Gross Weight: 1.32KG
OPY Nylon Printing Tips:
1. Keep Nylon dry before printing.
Reason: Nylon easy to absorb air moisture.
Case: Show bubbles when extruding if wet.
Solution: Dry in an oven at 80℃ for 3-6 hours.
Storage: Self-sealing bag with desiccant.
2. Heating bed is necessary to reduce warping.
Printing with sealed chamber will be better.
3. Effective ways to improve layer adhesion.
a) Stick Blue tape or Kapton tape on heat bed.
b) Coat PVP glue on heat bed.
c) Reduce printing speed.
d) Cura: Build Plate Adhesion Type -> Raft.
Customer Reviews
85 ratings
fast delivery (10)
well-packaged (7)
requires drying (5)
even winding (3)
excellent nylon (3)
excellent quality (1)
Customer photos (16)
Buyer from North Macedonia
August 4, 2026
Variant: Color:Nylon Nature 10m Ships From:China Mainland
This filament is an absolute disaster to work with, i had horrible time trying to print with it. It kept jamming and bubbling. However this is most likely due to user error. After i dry the filament i should be able to print something out of this material.
Л***ч
July 21, 2026
Variant: Color:Nylon Nature Ships From:Russian Federation
Fast delivery. The product I ordered arrived. Now it's drying; the print test will be done later.
Translated by AliExpress ·
А***в
June 29, 2026
Variant: Color:Nylon Nature Ships From:Russian Federation
everything is at the highest level! keep it up!
Translated by AliExpress ·
В***в
June 25, 2026
Variant: Color:Nylon Nature Ships From:Russian Federation
arrived really "dry", less than 20% humidity. I'll try it in print and add a review.
Translated by AliExpress ·
Л***ч
June 17, 2026
Variant: Color:Nylon Black Ships From:Russian Federation
I really liked the plastic; before this I was using PA6, which was very difficult to print with. This one prints much better under the same conditions, 280/105, active camera 65, 2.1% shrinkage compensation, hard to break the supports.
Translated by AliExpress ·
И***н
June 2, 2026
Variant: Color:Nylon Black Ships From:Russian Federation
Very conscientious packaging. Vacuum, neat, pleasing to the eye)) Thank you!! !
Translated by AliExpress ·
Pa Nylon Polyamide 3D Filament Printer 1.75 mm 1 -f- 75 1kg 10m 100g Diy For Shipping Thread White Nature Color
3.86$
3.66$
Quantity:
1
Availability:
Color
Ships From
