For Kawasaki Z750 Z1000 Z-750 Z-1000 2007 2008 2009 Motorcycle Gear Indicator Speed Digital Display Meter Ecu Plug Accessories

If you have any questions, please feel free to contact customer service, thank you.

Dedicated

FOR Z750 Z1000 2007 2008 2009

motorcycle Ecu directly installed 1-6 gear indicator motorcycle speed digital meter

(If you encounter any questions, please be sure to contact me first, please do not leave negative comments first, I very much hope to answer your questions, thank you)

▲Fitment:

FOR KAWASAKI Z750 2007 2008 2009

FOR KAWASAKI Z1000 2007 2008 2009

▲Description:

Condition:100% Brand New

Item Name:Speed Gear Display Indicator

Size:4cm*4cm*4cm/1.57inch*1.57inch*1.57inch

▲Feature:

Shows current gear number

Indicates current gear from 1 to max of 6. as well as a neutral indicator.

Detects the current gear faster than other gear indicators that use speedometer/tachometer signal.

Display can be mounted anywhere

▲Installation:

Find the 4-pole male diagnostic connector(DLC), usually near the ECU box,It may have a removable cap and may be partially covered by black tape.

▲Foreword:

Congratulations on your purchase of this gear position indicator,Unlike other gear indicators available for your bike,this product connects to the diagnostic connector.It make the installation very sample. The unit reads data directly from the ECU, offering faster and more reliable readings than competing products.The display is auto learning,there are no button and no ;programming wire; Know limitations;Your bike is not equipped with Gear Position Sensor. therefore determining the gear in use is only possible when the engine is running and the clutch is released.

▲Troubleshooting:

Connect the plugs and make sure all connections are good and the connectors are fully seated, the pins are straight and make a good connection to the motorcycle plug induction.If you can not execute the setup procedure,your battery might be old or weak.Charge the battery or connect another battery using a jumper cable.If some gears are not indicated properly when the engine is running and clutch is released,rest the unit and setup again.If the problem persists.your clutch might be slipping.

(No reset is generally required. If you need to reset, please consult our customer service. The customer service will reply you as soon as possible after seeing the information.)

▲Package List:

1 x Motorcycle Speed Gear Display/Bracket(As shown in the option picture)