Handheld Digital Induction Chainsaw Tachometer Gasoline Engine Tachometer, LCD Display Tach Gauge for Chainsaw Lawn Motorcycle

Features:

This product can be used in all gasoline engines with spark plugs. This tachometer is simple to use and suitable for two-stroke single-cylinder, four-stroke two-cylinder, and gasoline engines that ignite once a week; more suitable for: chainsaws, lawn mowers Test speed of gasoline engine.

   The range of measurement speed: 100RPM to 30,000RPM.

   Due to inductive design, put the meter near the spark plug cable, it will test the data,

Method 1: Keep the meter between the spark plugs 3-5CM and then test.

Method 2: insert the pick-up wire into the hole of the meter and make the metal clip clamped on the spark plug cable.

   LCD liquid crystal display/ Low Voltage/Powered by built -in battery/ inductive design/sate and reliable.

   Hold down the MODE key for a long time to check the historical high speed data.

   Timing range: 1 minute to 99999 minutes (MIN).

   Speed mode setting: Press and hold (SET) key for a long time, the screen will

   System data reset function: hold (SET) for a long time, and the screen will display 01,02,03,04 in turn; When the screen displays 04, it flashes for 3 to 5 seconds. When the finger releases the button, the display data flashes for 3 to 5 seconds and stops, then enters the system reset MODE, Hold down the MODe key and SET key at the same time until the full-screen display (the receto zero).ded working time and speed data are reset

   The product will enter power-saving mode when not in use, once testing it will enter working mode.

Specification :

Type: Digital Tachometer

Measuring Range: 100-30000 RPM

Timing Range: 1-99999 Minutes

Measurement Accuracy: 1%

Resolution: 100%

Power Supply: 1x CR2450 button battery

Retailed Package: Yes

Package Includes:

1 set xTachometer Meter