JAYO 5 Rolls 3D Filament PLA/PLA META/PETG/SILK PLA+/Wood/PLA Marblel/ APLA 1.75mm1.1KG 3D Printer Filament for FDM Muticolor

1：PLA META Filament Features

1. Environmental protection, non-toxic, biodegradable;
2. Soft and warm colors
3. Low shrinkage rate;
4. High strength and rigidity;
5. Very good toughness, not easy to break
6. The printing temperature is 180~200°. Lower printing temperature, means more energy saving and environmental protection, reduce printer loss.
7. Good fluidity: The printing fluency is better than the existing PLA and PLA+, greatly improving the printing success rate.
8. Good fall resistance and impact resistance: After the fall test, the fall resistance is about one times better than the existing PLA and PLA+.

Suitable for all models of FDM3D printers, suitable for printing crafts, artwork and industrial design samples, etc.

High Liquidity
Suitable For Fast Printing

Lower printing temperature,
means more energy saving and environmental protection, reduce printer loss.

PLA META Filament Parameter

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 180-200℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles

2：PLA Filament Features

1. Environmental protection , non-toxic , biodegradable ;
2. No Bubble , Low shrinkage , bright color ;
3. High strength and strong rigidity ;

It is suitable for all types of FDM3D printers , suitable for printing crafts , artworks and industrial design samples, etc.

PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.

PLA Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

3：PETG Filament Features

1. Environmental protection and non-toxic;
2. Low shrinkage;Bright color;High transparency and good gloss.
3. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent, weather resistance, and good adhesion.
4. Good dimensional stability, no cracks And warping.
Suitable for all types of FDM3D printers, suitable to Co-print all kinds of commonly used models, crafts, industry Pieces, advertising words, etc.

PETG filament is easy to use like PLA, durable strength like ABS

PETG Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

4：PLA+ Filament Features

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;

PLA PLUS is 10 times higher toughness than PLA and has excellent toughness.

PLA+ Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 210-235℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

5：SILK Filament Features

1. Environmentally friendly, non-toxic, biodegradable;
2. Close to silk effect;
3. Low shrinkage
4. Toughness 50 times higher than PLA on the market
5.Printing is smooth, and the surface of the finished product is smoother and more delicate;
Suitable for all types of FDM3D printers, suitable Co-print crafts, artwork, industrial design samples And product models with higher toughness requirements, etc.

silk filament brings arts & crafts and 3D projects smooth shiny silk-like surface

SILK Filament Parameter

Diameter：1.75±0.02MM
Print Temp.：200-230℃
Platform Temp.：Alternatives 60-80℃
Print speed：30-60MM/s

Neatly Wound Filament

JAYO has a professional production line with strict control of neatly lined up lines to avoid knots during printing.Completely mechanical wire winding and strict manual checks to ensure a neat lines of JAYO PETG/PLA+/WOOD/SILK PLA filament with few knots, avoiding possible breaks.