Smart Socket 16A EU French Power Plug 433Mhz Universal Remote Control Switch Controller 220V LED Programmable Electrical Outlets

Smart Socket 16A EU French Power Plug 433Mhz Universal Remote Control Switch Controller 220V LED Programmable Electrical Outlets

Features:
◆The socket can be manually operated or via the remote control.
◆The night light can only be controlled by the transmitter.
◆The socket receiver will still remain in the “OFF” mode after power out, even when the power comes on again.
◆ The transmitter and the socket receiver can be freely combined ( transmitter or socket receiver must from our company), only need to program according to the manual.

"1 socket only" represents only a socket (excluding remote control); "1 remoter only" represents only a remote control (excluding socket). The remote control and socket of this product cannot be used with other products, even if the frequency is the same. So if you have not purchased this product, please do not purchase a separate remote control or socket, otherwise you cannot use it with your product. Thank you very much for understanding.

Socket receiver
Input Voltage: 230V AC,50/60Hz
Max.load current: 16A
Transmission frequency: 433.92MHz

Transmitter
Power for transmitter:1 section DC12V 23A battery
(make sure the installation of battery is correct,Product does not include battery)

Wireless socket (EU/FR common)

16A high-power, suitable for small household appliances, with energy saving, Flame retardant material.

10-key remote control (12V.23A without battery)

Small, easy to place.

Wide compatibility

Compatible with all devices, such as lamps, lamps, air conditioning, heating, audio sound system, machinery ,String of holiday lights and all consumer electronics.

16A voltage can be used for small household appliances

Note: Before use, please refer to whether the parameters of household appliances are suitable for the voltage.

30~~100M WIRELESS RANGE

Strong RF signal 16A ,
very strong penetrating power, able to pass through doors and walls
30~~100M WIRELESS RANGE (In the open air)

Flame retardant material

1.Energy saving
2.safety protection devices
3.Environmentally friendly material

16A high-power (EU/FR common)

Programming

1.Press and hold the power button of the socket receiver for about 3 seconds till the LED indicator on.
2.Click the left button of the transmitter.Socket programming successful when the LED indicator flashes until it stays on.
3.Continue click the right button of the transmitter.Night light programming successful when the LED indicator flashes until it off.

Clear programming

Press and hold the power button of the socket receiver for about 8 seconds until the LED indicator flashes to go off.