Universal Rotating Cycling Cup Holder for Bicycles Electric Bikes and Motorcycles No Drilling Required

It seems like the product was made with a design defect. It functions, but the assembly method is very inconvenient, making it difficult to properly secure, and the durability is even worse. The support part came off after tightening the screws. It's cheap anyway, but still disappointing.

Translated by AliExpress · See original

The cost-performance ratio is excellent and I highly recommend it.

Translated by AliExpress · See original

The plastic is very thin, so you can't tighten the base sufficiently on the motorcycle. I tightened it a little more and it broke.

Mnghh

Translated by AliExpress · See original

At the point where the screw tightens the fastening, the plastic broke during installation. The only option was to drill a 6mm hole in the tube and attach it with a long screw at the outlet.

Translated by AliExpress · See original

The main drawback of this product is that the metal pin inside (about 5mm in length) is in the shape of a T (you can see the inside by unscrewing two screws). This pin is welded on, but the welding is not properly done on the wire that is as thick as a ballpoint pen lead, so it breaks after a few uses. If it breaks, it cannot hold the bottle, and the elasticity is lost.

Translated by AliExpress · See original